Directions to:
Corporate Headquarters Systems & Research Center
Manufacturing Facility
Hamilton Office

Corporate Headquarters Systems & Research Center

Our Corporate headquarters and Systems & Research Center is located at 1000 Technology Drive, Pittsburgh, Pennsylvania in the United States. In addition to the driving directions located here, you may find it helpful to reference a map of the area from the Yahoo! Maps site.

Driving directions from the north (Erie, Pennsylvania)
* I-79 South to I-279 South.
* I-279 South to I-579 South.
* 579 South across the Veterans Bridge.
* Take 6th Avenue Exit, go through the light onto Ross Street.
* Follow Ross Street.
* Make a Left onto 2nd Avenue.
* Follow 2nd Avenue through 5 traffic lights.
* Turn right onto Technology Drive after 5th traffic light.
* Union Switch & Signal Inc. is the first building on the right.

From the east (Philadelphia, Pennsylvania)
* Pennsylvania Turnpike West to Pittsburgh.
* Exit Turnpike at the Monroeville Exit (#6).
* Follow Parkway I-376 West towards Pittsburgh.
* Exit the Parkway at Glenwood Exit (#7B).
* Turn right off the exit ramp onto Bates Street.
* Straight through the stop light at Second Avenue.
* Turn right onto Technology Drive.
* Union Switch & Signal Inc. is the fourth building on the left.

From the south (Morgantown, West Virginia)
* I-79 North to I-279 North through the Fort Pitt Tunnel and across the Fort Pitt Bridge.
* Exit #8 to I-376 East towards Monroeville (right lane on bridge).
* I-376 to Grant Street Exit (#3) on the left.
* Straight through the first stop light.
* Turn right onto First Avenue.
* Turn at the first left onto Ross Street.
* Turn at the first right onto Second Avenue.
* Turn right at the Pittsburgh Technology Center (almost 2 miles).
* Turn right onto Technology Drive.
* Union Switch & Signal Inc. is the first building on the left.

From the west (Pittsburgh Airport)
* Route 60 South to Route 22/30 East to I-279 North (continuous road, no turns).
* Exit #8 to I-376 East towards Monroeville (right lane on bridge).
* I-376 to Grant Street Exit (#3) on the left.
* Straight through the first stop light.
* Turn right onto First Avenue.
* Turn at the first left onto Ross Street.
* Turn at the first right onto Second Avenue.
* Turn right at the Pittsburgh Technology Center (almost 2 miles).
* Turn right onto Technology Drive.
* Union Switch & Signal Inc. is the first building on the left.

Back to the top

Manufacturing Facility

Our manufacturing facility is located at 645 Russell Street, Batesburg, South Carolina in the United States. In addition to the driving directions located here, you may find it helpful to reference a map of the area from the Yahoo! Maps site.

Driving directions from the east (Columbia, South Carolina)
* US 1 West to Leesville.
* Pass SC 23 intersection (DO NOT FOLLOW SC 23 TO BATESBURG).
* Pass stoplight at Pine Street (Hardee's).
* Continue straight four blocks; angle right onto Russell Street.
* Union Switch & Signal Inc. is the second building on the right.

Driving directions from the west (Atlanta, Georgia)
* I-20 East to US 178 Exit (#39)
* US 178 West to Batesburg.
* Turn left at first stop light (Hardee's) onto US 1/Columbia Avenue.
* Continue straight four blocks; angle right onto Russell Street.
* Union Switch & Signal Inc. is the second building on the right

Back to the top

Hamilton Office

You may find it helpfull to reference a map of the area.

From Pittsburgh via PA Turnpike East:

Take PA Turnpike to exit 351 (old exit 28) - Rt. 1. Pay toll, using left toll lane. Take Route 1 North.
Here you have two options:
Option No 1. (shortest distance but can be slow depending on traffic/time)

Use Route 1 North all the way, by passing the I-95 exit.
Continue past Trenton Bridge and city of Trenton.
Exit at Whitehead Road, bear right at end of ramp and make a left at traffic light (Sweet Briar Rd)
Continue on Sweet Briar and make a left at American Metro Blvd (2nd light).
At stop sign, make a right and proceed till you see a clock tower (on your left). Park at that area and enter at main lobby, go straight to end, and go through a fire door on your left. USS office is on your left, passing over two offices. BE SURE TO OBTAIN VISITOR'S PARKING PASS FROM RECEPTIONIST!

Option No. 2. (using I-95)
- From Route 1, take the exit to I-95 North, crossing over to New Jersey through Scudder Falls Bridge into NJ I-95 and approximately 5 - 6 miles, the I-95 North will become I-295 (don’t be alarmed, you will see it as you passed Exit 67).
- Take exit 65B (Sloan Road or sign says Hamilton Train station), after exiting, merge to the next lane (middle). Proceed straight through traffic light (Hamilton train station will be on you right, do not go into the train station parking!)
- Cross over the bridge overpass the RR tracks. At the light (American Metro Blvd) make a right. At the stop sign, make another right and proceed till you see a clock tower. Park at that area and enter at main lobby, go straight to end, and go through a fire door on your left. USS office is on your left, passing over two offices. BE SURE TO OBTAIN VISITOR'S PARKING PASS FROM RECEPTIONIST!

From Philadelphia (south) via I-95:

Take I-95 north, crossing over to New Jersey through Scudder Falls Bridge into NJ I-95 and approximately 5 - 6 miles, the I-95 North will become I-295 (don’t be alarmed, you will see it as you passed Exit 67 – Route 1).
Take exit 65B (Sloan Road or sign says Hamilton Train station), after merging skip to the next lane (middle). Proceed straight through traffic light (Hamilton train station will be on you right, do not go into the train station parking!)
Cross over the bridge overpass. At the light (American Metro Blvd) make a right. At the stop sign, make another right and proceed till you see a clock tower. Park at that area and enter at main lobby, go straight to end, and go through a fire door on your left. USS office is on your left, passing over two offices. BE SURE TO OBTAIN VISITOR'S PARKING PASS FROM RECEPTIONIST!
Or use Option 1 above by taking exit to Route 1 North and follow Option 1 instruction. (Shorter distance but during rush hours, can be very slow.)

By New Jersey Transit Northeast Corridor Train

Get off at Hamilton Station. If heading towards Trenton building is on same side of platform, Manhattan building is on opposite platform side.
Enter at clock tower. Enter at main lobby, go straight to end, and go through a fire door on your left. USS office is on your left, passing over two offices.

Back to the top